As stated by the bureau of labor and statistics, the mining profession is divided into five categories; coal mining, oil extraction, metal ore mining, gas, non-metal mineral mining, and support activities. An example of support activities is resource transportation. The different categories of mining require the utilization of particular tools. However, some tools are needed in all categories of the mining industry. These types of devices include:

 

Excavators, this is an automobile that either move on tracks or conventional wheels. In the past, people used to utilize traditional tools such as shovels, and stream shovels to crack the ground. In this modern time, miners mostly rely on this advanced machinery. It has a revolving platform that comes with a connecting arm with a scoop connected at the edge utilized for digging. The excavators can be used in many ways, such as forest work, construction, demolition, and hydraulic claws, cutter, breaker attachments, river dredging, and many others.

 

Draglines These machines are considered to be one of the vast tools in the world. They are used to drag dirt away to expose coal or underlying mineral deposits to the surface. They can move an estimated hundred of tons of minerals in one pass. Unlike all other mining equipment, draglines are not diesel-powered. They travel an approximate speed of a few meters per second, and the devices move using pontoons like caterpillar tracks. They are usually directed to the grid at voltages of 6.6 to 22 kV.

 

Drills, this machine is used by gasoline and fuel miners to reach deposits underneath the ground before piping them to the exterior. Charcoal and mineral miners, on the other hand, utilize drills to make large holes that they later fill with explosives to blast large portions of the terrain.

 

Roof bolters, these are massive machines powered by hydraulics utilized for forcing bolts in roofs. Other miners use the bolters by supporting the roof of tunnels that prevent collapsing. There are two types of large roof bolters, namely a single boom and coal boom. Single boom roof bolters have only one set of installing roof bolts. After installation, it has to be repositioned so that you can install the next lock. The area of support is usually 5 feet by 5 feet square meters. Dual boom roof bolters generally have a beam ATRS that enables several bolts to be by the same machine. An extensive support area is required to ensure there is no collapsing of the roof bolters

 

It completes the job much faster but costs a lot more.

 

Continuous Miners, these are mechanisms that have many huge rotating teeth, commonly composed of tungsten carbide. Underground coal miners utilize these machines to rake charcoal from charcoal beds. In dangerous situations, in particular, the workers remotely control the continuous miners. It is recommended to perform a wet cut where the cutting head is misted by water because it decreases dust, noise, and ignition while enhancing the cutting head’s life. It is also advisable to install a coolant system to prevent overheating of components.

 

Longwall miners, the difference between continuous miners and longwall miners, is that longwall does not scrape; instead, it extracts huge quadratic shapes of charcoal. It is said that constant miners have a chain of enormous cutting shears and an automated hydraulic system. Which supports the ceiling of the mineshaft as portions of charcoal are extracted. To prevent the ignition of charcoal in the goaf area, the air is let to increase beyond the seals to remove oxygen from the closed goaf section.

 

Rock Duster are pressurized bits of tools that miners utilize by spraying dormant mineral particles over extremely combustible charcoal dust. The immobile dust aids in preventing explosions and unexpected fires.

 

Shuttle Cars and Scoops are used by miners to transport coal from the sources to secure points in the mine. The fuel is then taken from there using an ordinary spoon or pulling automobiles to drive the load out of the pit ultimately. Miners utilize haulage automobiles for various works.

 

Almost all the machinery mentioned above can be found on Source Pro Equipment, whereby they import, procure, and sell a wide range of earth-moving and agriculture products. They have aided a wide range of clients for over eight years. They sell not only almost all the above products but also more.

 

Autobiography

Eric Reyes is a passionate thought leader having been featured in 50 distinguished online and offline platforms. His passion and knowledge in Finance and Business made him a sought after contributor providing valuable insights to his readers. You can find him reading a book and discussing current events in his spare time.